The fibers,250μm,are positioned in a loose tube made of a high modulus plastic.The tube are filled with a water-resistant filling compound.A steel wire, sometimes sheathed with polethylene(PE) for cable with high fiber count,locates in the center of core as a metallic strength member.Tube(and fillers)are stranded around the strength member into a compact and circular cable core.An Aluminum Polyethylene Laminate(APL) is applied around the cable core,which is filled with the filling compound to protect it from water ingress. then the cable core is covered with a thin PE inner sheath.After the PSP is longitudinally applied over the inner sheath,the cable is completed with PE outer sheath.Application:Duct/Aerial/Direct buried.
crush resistance and flexbility
PSP enhancing moisture-proof.
Loose Tube Double Sheath Underground Armored Cable(GYTA53)
Number of Conductors | >10 |
core | 2-146 |
cable diameter | 13.7-20.9 |
RTS | 1000/3000N |
Span | |
MAT | |
reinforcement | ALP+PSP |
Voltage | |
cable weight | 190-373kg/km |
Bending | 10/20D |
The fibres,250μm,are positioned in a loose tube made of a high modulus plastic.
The tubes are filled with a waterresistant filling compound.A steel wire,sometimes sheathed with polyethylene(PE) for
cable with high fiber count,locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded
around the strength member into a compact and circular core. An Aluminum Polyethylene Laminate (APL) is applied
around the cable core,which is filled with the filling compound to protect it from water ingress,then, the cable core is
completed with a PE sheath .After the PSP is longitudinally applied over the inner sheath,the cable is completed
with a PE outer sheath.
• Applications:
1. Duct, Aerial, Direct bruied.
2.High speed optical routes in buildings(FTTX)
•Characteristics:
1. Good mechanical and temperature performance
2. High strength loose tube that is hydrolysis resistant
3. Specially designed compact structure is good at preventing loose tubes from shrinking
4. Special tube filling compound ensure a critical protection of fiber
5. PE sheath protects cable from ultraviolet radiation
6. Steel wire used as the central strength member
7. Loose tube filling compound
8. APL moisture barrier
Fiber count | Nominal diameter (mm) | Nominal weight (kg/km) | Max fiber per tube | No. Of (tubes+fillers) | Allowable tensile load (N) | Allowable load resistance (N/100mm) | ||
Short term | Long term | Short term | Long term | |||||
2-36 | 13.9 | 202 | 6 | 6 | 3000 | 1000 | 3000 | 1000 |
38-72 | 15.1 | 241 | 12 | 6 | 3000 | 1000 | 3000 | 1000 |
74-96 | 17.1 | 290 | 12 | 8 | 3000 | 1000 | 3000 | 1000 |
98-120 | 18.6 | 333 | 12 | 10 | 3000 | 1000 | 3000 | 1000 |
122-144 | 20.2 | 381 | 12 | 12 | 3000 | 1000 | 3000 | 1000 |
>144 | Design according to your requirement. |
• Packing & Shipping
Rolled by wooden drums. 2km-3km per drum or other required.
2. Sheath mark
The following printing is applied at 1-meter intervals.
a. Supplier: Changguang or as cuctomer required
b. Standard Code(Product Type, Fiber Type, Fiber Count)
c. Year of manufacture: xxx
d. Length marking in meters